Control

  • GD Model 253

    Tracking Receiver

    Low-profile, rack-mount chassis

    L to Ka single and multi-band configurations available

    Front panel LCD display and keypad

    Remote controllable via RS-232/422

  • GD DTR

    Digital Tracking Receiver

    L-band range of 950 - 2050 MHz

    L,S,C,X,Ku, and Ka-band single and multi-band configurations available

    Single/Dual direct-connect polarization inputs

    Wide input signal dynamic range (70 dBm nominal)

    Outstanding sensitivity (minimum C/No is better than 35 dB-Hz)

    Fully synthesized tuning with 1 kHz tuning steps

    User-selectable tracking slope

    Spectral Display

  • GD Model 500

    Tracking Receiver

    Dual touch screen display system with intuitive user interface

    Embedded control and DSP processors

    Digital or analog receiver

    Up to 4 internal block down converters for any frequency band combination from L to Ka

    Dual 100MB Ethernet and EIA-422 serial ports

    Internal L-Band test signal generator

  • GD Model 930A

    Antenna Control System

    Tracking, Pointing, and Acquisition modes

    Ideal for single AC motor (per axis) antennas

    Stable to 5° inclined GEO targets

  • GD Model 950A

    Antenna Control System

    Tracking, Pointing, and Acquisition modes

    Ideal for single AC motor (per axis) antennas

    Single, Dual, or Multi-speed antenna motor drives

    Stable to highly inclined GEO targets

    Flexible receiver options

    Designed to minimize site cabling

  • GD Model 970

    Antenna Control System

    Tracking, Pointing, and Acquisition modes

    Single drive per axis, multiple axes

    AZ/EL, X-Y, HA/Dec, and AZ/EL/Tilt pedestals

    GEO, LEO, TT&C, RADAR, or Celestial applications

    Single or Multi-Band operation

    Wide dynamic range and fine control resolution

  • GD Model 990

    Antenna Control System

    Tracking, Pointing, and Acquisition modes

    Single drive per axis, multiple axes

    AZ/EL, X-Y, HA/Dec, and AZ/EL/Tilt pedestals

    GEO, LEO, TT&C, RADAR, or Celestial applications

    Single or Multi-Band operation

    Wide dynamic range and fine control resolution

  • Atlantic Satellite ASC300LW

    $2,475.00

    Beacon Receiver 930 - 2300 MHz

    The Model ASC300-LW Beacon Receiver is a high performance unit that is designed to real time track the power density of a satellite beacon and output a temperature stabilized DC voltage that is linearly proportional to the beacon power by utilizing a true, RMS-responding power detector. The proprietary "SWEEP TRAC" option provides signal tracking capability for higher drift LNB's. Also can be used on telemetry beacons.

  • Atlantic Satellite ASC300LW-HC

    $2,600.00

    Beacon Receiver 930 - 2300 MHz

    The Model ASC300LW-HC Beacon Receiver is a high performance, high stability unit that is designed to real time track the power density of a satellite beacon and output a DC voltage that is linearly proportional to the beacon power by utilizing a true, RMS-responding power detector. The proprietary “SWEEP TRAC” option provide signal tracking capability for higher drift LNB’s. The applications for the ASC300LW-HC are for antenna step track controlling and uplink power control system. Also can be used on telemetry beacons.

  • Atlantic Satellite ASC300L-D

    $2,475.00

    Beacon Receiver 930 - 2300 MHz

    The Model ASC300L-D Beacon Receiver is a high performance unit that is designed to real time track the power density of a satellite beacon and output a DC voltage that is linearly proportional to the beacon power by utilizing a true, RMS-responding power detector. The applications for the ASC300L-D are for antenna step track controlling and uplink power control system.

  • Atlantic Satellite ASC302LE-L

    $4,750.00

    Beacon Receiver 930 - 2150 MHz

    The Model ASC302LE-L Beacon Receiver is a dual beacon receiver that is comprised of two totally independent units in a single rack mount space. The ASC302LE-L is a high performance unit that is designed to real time track the power density of a satellite beacon and output a DC voltage that is linearly proportional to the beacon power by utilizing a true, RMS-responding power detector. The applications for the ASC302LE-L are for antenna step track controlling and uplink power control system.