Quintech LS04 2150A/4x16

$681.00

Quad 4-Way L-Band Active Splitter

Power Supply
Quantity

  • Security policy Security policy
  • Delivery policy Delivery policy
  • Return policy Return policy

The LS04 2150A/4x16 (part# LS042150A4FWA000) is a commercial quality 4-way active splitter that meets strict level and match specifications achieved through the use of Quintech’s proprietary microstrip and SMT technology. It operates over the 950-2150 MHz frequency range and permits signal splitting with zero loss, eliminating the need for external distribution amplifiers. Internal circuitry has been incorporated into the LS042150A4FWA000 to allow parallel connection of 2 DC power sources for redundancy. The front panel includes 3 LEDs which indicate the current power status of the unit, along with a 2-amp fuse for each power input. The green LED labeled “POWER” will light if either power source is functional. If power source #1 fails, the red LED labeled P-1 will light. If power source #2 fails, the red LED labeled P-2 will light. If both power sources are operational, neither P-1 nor P-2 will light (see LNB power specification below). Note: Note that power is present at each input at all times. All unused RF output ports must have 75 0 terminations. If an input is being terminated, a DC block must be inserted prior to termination.

Operating Frequency
950 - 2150 MHz
Configuration
4 x 1:4
Input Return Loss
14 dB
Output Return Loss
15 dB
Insertion Loss
0 ± 2 dB
Type
Active
Impedance
75 Ω
P1dB
+3 dBm
Frequency Response
± 1 dB
Noise Figure
9 dB
Isolation
18 dB
RF Connectors
F-Type, BNC 75 Ω
Power Requirement
18-24 VDC Via 2-pin Quick Connect 100-240 AC 50/60 Hz
LNB Power
18 - 24V (1.7A max. available for LNB power)
Power Consumption
10W (plus customer LNB power load)
Mechanical
1 RU: 1.75” H x 19” W x 6.5” D
Gross Weight
10 lbs
Net Weight
3.2 lbs
Input Ports
4
Output Ports
16