2 Way Power Splitter
Security policy
Delivery policy
Return policy
An N-Way Wilkinson power divider (splitter) has a single input port and N in-phase output ports ideally of 1/N times the input power. The input match (VSWR) of the divider is dependent upon the reflection coefficients (match) of the output terminations. Thus, the isolation between output ports is determined, in part, by any load mismatch. Since power dividers are reciprocal devices they may also be used as combiners. Power handling under mismatch loads is limited by the internal resistor rating. Power dividers are generally more broadband than hybrid couplers with better amplitude balance. We now offer Low PIM (Passive Intermodulation) versions of our power dividers.
- Frequency Range
- 698 - 2700 MHz
- VSWR
- 1.3: 1 Max
- Power
- 50 Watts Avg.
- Relative Humidity
- 5% - 95%
- Operating Temperature
- -35°C to +65°C
- Insertion Loss
- 3.5 dB Max
- Impedance
- 50 Ohms
- Isolation
- 20 dB Min
- Connector Type
- N female
- PIM
- -155 dBc Min @ 2 x 43 dBm
Specific References