Quintech XTREME RP1 Modular Power and Signal Redundancy Chassis

Quintech XTREME RP1 Modular Power and Signal Redundancy Chassis 

The Quintech XTREME RP1 is a modular 1RU power and signal redundancy chassis designed for centralized LNB power control, RF signal protection and system monitoring. Eight hot-swappable card slots support flexible combinations of Bias-T power inserters, DC power outputs and 2×1 RF or optical sensing redundancy switches.

The RP1 supports up to 16 LNB Bias-T power inserters, eight 2×1 redundancy switches or 16 quick-disconnect DC power outputs. Redundant hot-swappable power supplies, replaceable RF and power modules, and a field-swappable cooling fan help maximize system uptime.

Optional Q-Sense redundancy modules monitor primary and backup RF or optical inputs and automatically switch to the secondary path when the primary signal falls below a configured threshold. The RP1 also provides Gigabit Ethernet, web-based management, SNMP, event logging, 10 MHz reference distribution and XR Bus expansion.

Specifications:

Product Type: Modular Power and Signal Redundancy Chassis
Manufacturer: Quintech Electronics
Product Series: XTREME RP1
Chassis Capacity: 8 Hot-Swappable Card Slots
Mechanical Format: 1RU Rackmount

Supported Module Types:

LNB Power Module: Dual Bias-T Power Inserter
DC Power Module: Dual 2-Pin Quick-Disconnect Output
Redundancy Module: 2×1 RF or Optical Sensing Switch
Maximum Bias-T Outputs: 16
Maximum DC Power Outputs: 16
Maximum 2×1 Redundancy Switches: 8

LNB and DC Power:

LNB Voltage: 0, 13 or 18 VDC with 22 kHz Tone
LNB Voltage Adjustment: 13.0–14.2 VDC and 18.0–19.8 VDC
LNB Current per Port: 400 mA Nominal
Peak LNB Inrush Current: 550 mA
Quick-Disconnect Output Current: 750 mA per Port
Protection: Short-Circuit Protection with Automatic Reset
Status Monitoring: Under-Current, Short-Circuit and Normal

Bias-T RF Module:

Frequency Range Options: 950–2150, 950–2500 or 700–3000 MHz
Insertion Loss, 950–2500 MHz: 1 dB Maximum
Insertion Loss, 700–3000 MHz: 1.5 dB Maximum
Return Loss, 950–2150 MHz: 14 dB Minimum
Return Loss, 950–2500 MHz: 12 dB Minimum
Return Loss, 700–3000 MHz: 10 dB Minimum
Isolation: 65 dB Minimum
Connector Options: Type F Female, 50- or 75-Ohm BNC Female, SMA Female

2×1 Redundancy Switch Module:

Control Modes: Automatic or Manual
Inputs: Primary and Secondary RF or Optical
Outputs: One RF Output per Module
RF Frequency Range Options: 950–2150, 950–2500 or 700–3000 MHz
RF Sensing Range: -50 to 0 dBm
Optical Sensing Range: -35 to 0 dBm
RF Switching Time: 1 µs Make/Break
Maximum Response Time: 1 Second
Maximum RF Input Power: 24 dBm
Maximum DC on RF Input: 30 VDC
Maximum Optical Input: +10 dBm
Optical Wavelength Range: 900–1650 nm
Connector Options: Type F, 50- or 75-Ohm BNC, SMA, SC or LC

Control and Monitoring:

Local Control: 2.2-Inch LCD with Rotary Knob
Network Interface: Single or Dual Gigabit Ethernet
Remote Control: Web Server, Secure Web Server, SNMP and TCP/IP
SNMP Versions: v2c and v3
TCP/IP Protocol: Quintech 2.15, Port 9100
Expansion Interface: XR Bus
Time Synchronization: NTP Client
Logging: Syslog, SQL or CSV
Alarms: SNMP Status and Switch-Change Traps
Reference Distribution: 10 MHz to All Card Slots
Maximum 10 MHz Input Level: 0 dBm

Power and Mechanical:

Power Supplies: Dual Hot-Swappable Redundant Supplies
AC Inputs: Separate AC Inlets
Power Requirements: 100–240 VAC, 50/60 Hz, 5 A Maximum
Power Consumption: 10 W Standby; 200 W Fully Loaded
Cooling: Field-Swappable Long-Life Fan
Dimensions: 1.75 in. H × 19 in. W × 18.5 in. D
Net Weight: 9 lb.
Gross Weight: 12 lb.
Certifications: CE, TUV NRTL and FCC Part 15
Operating Temperature: 0°C to +50°C
Storage Temperature: -10°C to +75°C
Relative Humidity: 20% to 90%, Non-Condensing
Maximum Operating Altitude: 10,000 ft. AMSL

Available now at Esatcom Inc. Please contact us for configuration, pricing and lead time.