ETL Systems Piranha PRN-G1S-LS2-106 LNB DC & 10 MHz Injector 13–24 V

ETL Systems Piranha PRN-G1S-LS2-106 LNB DC & 10 MHz Injector 13–24 V

The ETL Systems Piranha PRN-G1S-LS2-106 is an LNB DC power inserter module for satellite communications and RF distribution systems. Operating from 850–2450 MHz, it supplies selectable DC power at port 1 to a compatible LNB or similar equipment.

Output settings include off, 13 V, 18 V, and 24 V, with custom voltage selection from 13–24 V in 1 V steps. The module supports a maximum LNB load of 1 A and includes overcurrent protection. A 22 kHz tone is available in selected configurations; confirm the required voltage and tone combination when requesting a quotation.

When installed in a compatible GENUS chassis fitted with the required 10 MHz reference card, the module provides switchable 10 MHz injection onto port 1. LNB current and RF input power monitoring support user-settable upper and lower alarm limits.

Each hot-swappable module occupies one slot in a compatible GENUS 1U or PRN-G1x chassis. Local control is provided through the parent chassis HMI, if fitted, with remote monitoring and control through the chassis Ethernet interface.

Specifications

Model: PRN-G1S-LS2-106
Product Type: LNB DC power inserter / bias-T with 10 MHz injection capability
Frequency Range: 850–2450 MHz
Signal Paths: Single path
Chassis Compatibility: GENUS 1U series or PRN-G1x chassis; one slot
RF Connector Options: 50Ω SMA, 50Ω BNC, 75Ω BNC, or 75Ω F-type
Insertion Loss: Less than 1.5 dB across the full band
Flatness: ±0.40 dB full band; ±0.15 dB over any 36 MHz
Return Loss: 17 dB typ.; 14 dB minimum
Module-to-Module Isolation: 80 dB minimum
LNB DC Output: Off, 13 V, 18 V, or 24 V; custom 13–24 V in 1 V steps; at port 1; ±5% tolerance typ.
Maximum LNB Load: 1 A; overcurrent protection with current limiting at approximately 1.5 A
22 kHz Tone: Configuration dependent; confirm availability with ETL
10 MHz Injection: Switchable on/off at port 1 with compatible chassis reference hardware
RF Input Power / Detection: +10 dBm absolute total maximum input; −50 to −10 dBm total-power indication range
Power / Dimensions / Reliability: Dual redundant chassis 12 V DC bus; 34 W full load, 3 W no load, maximum steady-state consumption; 256 × 42 × 22 mm maximum; 0.18 kg; MTBF greater than 250,000 hours

Connector Configurations

• PRN-G1S-LS2-106-S5S5: 50Ω SMA

• PRN-G1S-LS2-106-B5B5: 50Ω BNC

• PRN-G1S-LS2-106-B7B7: 75Ω BNC

• PRN-G1S-LS2-106-F7F7: 75Ω F-type

Key Features

• Selectable 13 V, 18 V, or 24 V LNB power.

• Custom voltage selection from 13–24 V in 1 V steps.

• Up to 1 A LNB load capacity.

• Switchable chassis-supplied 10 MHz reference injection.

• 22 kHz tone available in selected configurations.

• LNB current and RF input power monitoring with user-settable alarms.

• Hot-swappable, single-slot machined aluminium module.

• Local and remote control through the compatible parent chassis.

This listing covers one PRN-G1S-LS2-106 module in the selected connector configuration. The parent chassis, 10 MHz reference card, LNB, RF cables, and other accessories are sold separately unless included in the quoted configuration. The 1.5 A protection threshold does not increase the maximum rated LNB load of 1 A. RF power detection is for indication only. Specifications apply to 50Ω connectors unless otherwise stated. Confirm voltage, 22 kHz tone availability, reference requirements, and chassis power capacity when requesting a quotation.