ETL Systems Piranha PRN-G1S-LS2-107 LNB DC Injector 13–24 V

ETL Systems Piranha PRN-G1S-LS2-107 LNB DC Injector 13–24 V

The ETL Systems Piranha PRN-G1S-LS2-107 is an LNB DC power inserter module for satellite communications and RF distribution systems. Operating from 850–2500 MHz, it supplies selectable DC power at port 1 to a compatible LNB or similar equipment.

Output settings include off, 13 V, 18 V, and 24 V, with custom voltage selection from 13–24 V in 1 V steps. The module supports a maximum LNB load of 1 A. Overcurrent protection provides current limiting at approximately 1.5 A, with trip and restart functionality.

A 22 kHz tone is available in selected configurations. Confirm the required voltage and tone combination when requesting a quotation.

LNB current and RF input power monitoring support user-settable upper and lower alarm limits through the parent chassis. Local monitoring and control are available through the chassis HMI, if fitted, with remote access through the chassis Ethernet interface.

Each hot-swappable module occupies one slot in a compatible GENUS 1U or PRN-G1x chassis. Available RF connector configurations include 50Ω SMA, 50Ω BNC, 75Ω BNC, and 75Ω F-type.

Specifications

Model: PRN-G1S-LS2-107
Product Type: LNB DC power inserter / bias-T
Frequency Range: 850–2500 MHz
Signal Paths: Single path
Chassis Compatibility: GENUS 1U series or PRN-G1x chassis; one slot
RF Connector Options: 50Ω SMA, 50Ω BNC, 75Ω BNC, or 75Ω F-type
Insertion Loss: Less than 1.5 dB across the full band
Flatness: ±0.40 dB full band; ±0.15 dB over any 36 MHz
Return Loss: 17 dB typ.; 14 dB minimum
Module-to-Module Isolation: 80 dB minimum
LNB DC Output: Off, 13 V, 18 V, or 24 V; custom 13–24 V in 1 V steps; at port 1; ±5% tolerance typ.
Maximum LNB Load: 1 A; overcurrent protection with current limiting at approximately 1.5 A, trip and restart
22 kHz Tone: Configuration dependent; confirm availability with ETL
RF Input Power / Detection: +10 dBm absolute total maximum input; −50 to −10 dBm total-power indication range
Power Supply / Consumption: Chassis-supplied dual redundant 12 V DC bus; 34 W full load, 3 W no load, maximum steady-state consumption
Dimensions / Weight / MTBF: 256 × 42 × 22 mm maximum; 0.18 kg; greater than 250,000 hours

Connector Configurations

• PRN-G1S-LS2-107-S5S5: 50Ω SMA

• PRN-G1S-LS2-107-B5B5: 50Ω BNC

• PRN-G1S-LS2-107-B7B7: 75Ω BNC

• PRN-G1S-LS2-107-F7F7: 75Ω F-type

Key Features

• Selectable 13 V, 18 V, or 24 V LNB power.

• Custom voltage selection from 13–24 V in 1 V steps.

• Up to 1 A LNB load capacity.

• Overcurrent protection with trip and restart.

• 22 kHz tone available in selected configurations.

• LNB current and RF input power monitoring with user-settable alarms.

• Hot-swappable, single-slot machined aluminium module.

• Local and remote control through the compatible parent chassis.

This listing covers one PRN-G1S-LS2-107 module in the selected connector configuration. The parent chassis, LNB, RF cables, and other accessories are sold separately unless included in the quoted configuration. This model does not specify 10 MHz reference injection. The approximately 1.5 A protection threshold does not increase the maximum rated LNB load of 1 A. RF power detection is for indication only. Specifications apply to 50Ω connectors unless otherwise stated. Confirm voltage, 22 kHz tone availability, and chassis power capacity when requesting a quotation.