ETL Systems Piranha PRN-G1S-TS2-112 Switchable 10 MHz Reference Injector

ETL Systems Piranha PRN-G1S-TS2-112 Switchable 10 MHz Reference Injector

The ETL Systems Piranha PRN-G1S-TS2-112 inserts a 10 MHz reference signal onto an 850–2500 MHz RF feed. Designed for a compatible GENUS platform with 10 MHz distribution, it allows reference injection at port 1 to be switched on or off through the parent chassis.

The module provides less than 1.5 dB insertion loss across the RF operating band. Port 2 is DC blocked. Available connector configurations include 50Ω SMA and 50Ω BNC.

RF input power indication and alarm status monitoring are available through the parent chassis. Local control is provided through the chassis HMI, if fitted, with remote monitoring and control through the chassis Ethernet interface. A module-face LED provides local status indication.

Each hot-swappable module occupies one slot and uses the chassis dual redundant 12 V DC bus. Maximum steady-state power consumption is 2 W.

Specifications

Model: PRN-G1S-TS2-112
Product Type: Switchable 10 MHz reference inserter
Frequency Range: 850–2500 MHz RF feed
Signal Paths: Single path
Chassis Compatibility: Compatible GENUS 1U or PRN-G1x platform with 10 MHz distribution; one slot
RF Connector Options: 50Ω SMA or 50Ω BNC
Port Functions: Port 1 receives 10 MHz injection; port 2 is DC blocked
10 MHz Injection: Switchable on/off at port 1
Insertion Loss: Less than 1.5 dB across the full RF band
Flatness: ±0.40 dB full band; ±0.15 dB over any 36 MHz
Return Loss: 17 dB typ.; 14 dB minimum
Module-to-Module Isolation: 80 dB minimum
Maximum RF Input Power: +20 dBm absolute total maximum
RF Power Detection: −50 to −10 dBm total power across the band; for indication only
Power Supply / Consumption: Chassis-supplied dual redundant 12 V DC bus; 2 W maximum steady-state consumption
Dimensions / Weight: 175 × 42 × 20 mm maximum; 0.18 kg

Connector Configurations

• PRN-G1S-TS2-112-S5S5: 50Ω SMA

• PRN-G1S-TS2-112-B5B5: 50Ω BNC

Key Features

• Adds a 10 MHz reference to an 850–2500 MHz RF feed.

• Switchable reference injection through the parent chassis.

• DC-blocked port 2.

• RF input power indication and alarm status monitoring.

• Local HMI control where fitted and remote chassis-based control.

• Module-face LED for local status indication.

• Hot-swappable, single-slot machined aluminium module.

• Module operating temperature: 0°C to +50°C, subject to chassis limits.

• Storage temperature: −20°C to +75°C; humidity: 20–90% non-condensing.

This listing covers one PRN-G1S-TS2-112 module in the selected connector configuration. The compatible parent chassis, required 10 MHz reference hardware, RF cables, and other accessories are sold separately unless included in the quoted configuration. The module inserts a chassis-supplied reference; it does not generate an independent 10 MHz reference. RF power detection and associated indications are for indication only. The module is rated for indoor use; any outdoor installation requires a suitable ETL enclosure and confirmation of system environmental limits. Confirm reference level, chassis compatibility, and connector requirements when requesting a quotation.