Actox ABA5DC

Transmit Frequency

5.850 - 6.725 GHz

Input Frequency

950 - 1825 MHz

LO Frequency

4.90 GHz

Output Interface

CPR 137G

Requirement for External Reference

Via IF Cable, Frequency: 10MHz (sine-wave), Input Power: -5 to +5 dBm @ input port

Power Output

5W

Gain Variation

+/-1.8 dB over full band

Gain Variation

+/- 0.5 dB over 40 MHz

Spectral Regrowth

-30 dBc (QPSK at 1.5x and OQPSK at 1.0x symbol rate offset with 2dB back-off from rated output power)

Noise Power Density

Tx: -66 dBm/Hz (max.)

Noise Power Density

Rx: -157 dBm/Hz (max.)

Phase Noise

-93 dBc/Hz @ 100 kHz

Phase Noise

-73 dBc/Hz @ 1 kHz

Phase Noise

-113 dBc/Hz max @ 1 MHz

Phase Noise

-53 dBc/Hz max. @ 10 Hz

Phase Noise

-63 dBc/Hz @ 100 Hz

Phase Noise

-83 dBc/Hz @ 10 kHz

Input VSWR

2.0:1

Output VSWR

2.0:1

Gain

62 dB nominal

IMD3 (two tones)

-26 dBc max. 2 signal 5 MHz apart at P-LINEAR

Gain Stability over Temperature

+/-1.5 dB typ., +/1.8 dB max.

Power

+15 VDC ~ +28 VDC via IF cable 19W max. (auto-ranging via IF connector)

Spurious

-50 dBc max.

LO Leakage

-45 dBm max.

Mute

Shut off the HPA if L.O. unlocked

LED Indicator

RED: Summary alarm

LED Indicator

GREEN: All OK

LED Indicator

YELLOW: ALL OK standard L.O. 4.90 GHz

Noise Figure max.

15 dB

Dimensions

5.51 (L) x 4.72 (W) x 2.06 (H) inches

Dimensions

140 (L) x 120 (W) x 52.5 (H) mm

Weight

1 kg (2.2 lbs) max.

Ambient Temperature

Operating: -40°C to +55°C

Ambient Temperature

Storage: -55°C to +85°C

Shock & Vibration

Complies with MIL-STD-810E

Specific References