Actox ABDN60KX

Transmit Frequency

13.75 - 14.50 GHz

Input Frequency

950 - 1700 MHz

LO Frequency

13.05 GHz

LO Frequency

12.80 GHz

Output Interface

Waveguide, WR75 (with Groove)

Requirement for External Reference

Via IF Cable, Frequency: 10MHz (sine-wave), Input Power: -5 to +5 dBm @ input port

Power Output

60W

Gain Variation

+/- 0.5 dB over 40 MHz

Gain Variation

+/-1.8 dB over full band

Spectral Regrowth

-30 dBc (QPSK at 1.5x and OQPSK at 1.0x symbol rate offset with 2dB back-off from rated output power)

Noise Power Density

Rx: -157 dBm/Hz (max.)

Noise Power Density

Tx: -66 dBm/Hz (max.)

Phase Noise

-115 dBc/Hz max. @ 1 MHz

Phase Noise

-55 dBc/Hz max. @ 10 Hz

Phase Noise

-65 dBc/Hz max. @ 100 Hz

Phase Noise

-75 dBc/Hz max. @ 1 kHz

Phase Noise

-85 dBc/Hz max. @ 10 kHz

Phase Noise

-95 dBc/Hz max. @ 100 kHz

Input VSWR

2.0:1

Output VSWR

2.0:1

Gain

72 dB typ.

IMD3 (two tones)

-26 dBc max. 2 signal 5 MHz apart at P-LINEAR

Power

80 - 240 VAC via MS connector 299W max.

Spurious

-50 dBc max.

LO Leakage

-45 dBm max.

FSK

Multiplexed on TX IFL, compatible with Comtech and Paradigm

Monitor & Control

M&C Interface: RS-232 / RS-485 / Ethernet

Mute

Shut off the BUC if L.O. unlocked

LED Indicator

YELLOW: standard L.O. 13.05 GHz

LED Indicator

YELLOW BLINKING: All OK extended L.O. 12.80 GHz

LED Indicator

Amplifier---RED: Summary alarm

LED Indicator

Amplifier---GREEN: All OK

LED Indicator

10MHz---GREEN: external 10 MHz reference

LED Indicator

10 MHz---GREEN Blinking: Internal 10 MHz reference

LED Indicator

10 MHz---RED: no 10 MHz reference detected

Noise Figure max.

20 dB

Dimensions

195 (L) x 120 (W) x 99 (H) mm

Weight

2.8 kg (6.17 lbs) max.

Ambient Temperature

Operating: -40°C to +55°C

Ambient Temperature

Storage: -55°C to +85°C

Shock & Vibration

Complies with MIL-STD-810E

Specific References