Actox ABD150KX
150W Extended Ku Band BUC
Output frequency 13.75-14.50 GHz
Based on GaN technology which enables high efficiency, low energy consumption and high reliability
Double - L.O. (electronically and manually switchable 12.80 and 13.05 GHz)
Extreme P-Out GaN linearity
Auto-ranging power 80-240 VAC power options
Incomparable low power consumption (895W max)
Digital temperature compensation
L.O. lock and Amplifier LEDs
Digital temperature compensation
Field-exchangeable (F/N) IF connector
M&C - combined RS-232/485/ and Optional FSK
Internal 10 MHz high stability 10-8 reference (optional)
Ethernet control (optional)
Security policy
Delivery policy
Return policy
ABD150KX
- Transmit Frequency
- 13.75 - 14.50 GHz
- Input Frequency
- 950 - 1700 MHz
- LO Frequency
- 13.05 GHz
- LO Frequency
- 12.80 GHz
- Output Interface
- Waveguide, WR75 (with Groove)
- Requirement for External Reference
- Via IF Cable, Frequency: 10MHz (sine-wave), Input Power: -5 to +5 dBm @ input port
- Power Output
- 150W
- Gain Variation
- +/-1.8 dB over full band
- Gain Variation
- +/- 0.5 dB over 40 MHz
- Spectral Regrowth
- -30 dBc (QPSK at 1.5x and OQPSK at 1.0x symbol rate offset with 2dB back-off from rated output power)
- Noise Power Density
- Tx: -66 dBm/Hz (max.)
- Noise Power Density
- Rx: -157 dBm/Hz (max.)
- Phase Noise
- -55 dBc/Hz max. @ 10 Hz
- Phase Noise
- -95 dBc/Hz max. @ 100 kHz
- Phase Noise
- -85 dBc/Hz max. @ 10 kHz
- Phase Noise
- -75 dBc/Hz max. @ 1 kHz
- Phase Noise
- -65 dBc/Hz max. @ 100 Hz
- Input VSWR
- 1.5:1
- Output VSWR
- 1.5:1
- Gain
- 75 dB nominal
- IMD3 (two tones)
- -26 dBc max. 2 signal 5 MHz apart at P-LINEAR
- Gain Stability over Temperature
- +/-1.5 dB typ., +/1.8 dB max.
- Power
- 80 - 240 VAC via MS connector 895W max.
- Spurious
- -53 dBc max.
- LO Leakage
- -45 dBm max.
- FSK
- Multiplexed on TX IFL, compatible with Comtech and Paradigm
- Monitor & Control
- Ethernet (optional)
- Monitor & Control
- M&C Interface: RS-232 & RS-485
- Mute
- Shut off the BUC if L.O. unlocked
- LED Indicator
- RED: Summary alarm
- LED Indicator
- GREEN: All OK
- LED Indicator
- YELLOW: standard L.O. 13.05 GHz
- LED Indicator
- YELLOW BLINKING: All OK extended L.O. 12.80 GHz
- LED Indicator
- 10MHz REF: GREEN (detected) RED (absent)
- Noise Figure max.
- 20 dB
- Dimensions
- 10.45” (L) x 7.87” (W) x 6.85” (H)
- Dimensions
- 265 (L) x 200 (W) x 174 (H) mm
- Weight
- 8.9 kg (19.6 lbs) max.
- Ambient Temperature
- Operating: -40°C to +55°C
- Ambient Temperature
- Storage: -55°C to +85°C
- Shock & Vibration
- Complies with MIL-STD-810E
Specific References
150W Extended Ku Band BUC
Output frequency 13.75-14.50 GHz
Based on GaN technology which enables high efficiency, low energy consumption and high reliability
Double - L.O. (electronically and manually switchable 12.80 and 13.05 GHz)
Extreme P-Out GaN linearity
Auto-ranging power 80-240 VAC power options
Incomparable low power consumption (895W max)
Digital temperature compensation
L.O. lock and Amplifier LEDs
Digital temperature compensation
Field-exchangeable (F/N) IF connector
M&C - combined RS-232/485/ and Optional FSK
Internal 10 MHz high stability 10-8 reference (optional)
Ethernet control (optional)