Advantech Ku-Band Synthesized Frequency Converter Single / Dual

Ku-Band Synthesized Frequency Converter Single / Dual FCS300

Overview

The Advantech HP range of K-band synthesized frequency converters uses the latest technology in conversion, local and remote control thus providing the ultimate in performance and user friendly operation at a very competitive price. The spectral purity, low phase noise and stability exceed the requirements of all major international satellite network operators. The flexible and comprehensive monitor and control features on the HP converter ensure that it will fit into any network management system architecture. The user-friendly front panel or the RS485 remote interface will provide full set-up and fault monitoring facilities. The RS232 will provide the Monitor and Control functions via a PC and will also allow for software downloading. The frequency converter is fully synthesized with the PLL oscillators either locked to a highly stable internal 10 MHz reference or if the external reference option is fitted and the proper level of signal is present, the PLL will automatically lock to the external reference.

Features

Outperforms IESS 308/309 phase noise by 3dB

Superior linearity

125 kHz step size

On-site reference aging correction capability

Intuitive front panel user interface

RS232 terminal and RS485 packet mode remote interface

Application

The HP range of Ku-band synthesized frequency converters is particularly suited for use in VSAT, SCPC Networks, SNG, DVB-RCS and Hub systems. This makes them an ideal choice for large earth stations requiring cost effective solutions for frequency conversion. The lightweight, rugged and compact design also ensures that the HP converter provides the ideal solution for mobile truck or flyaway DSNG systems. With fully welded aluminum chassis and robust modular internal construction the converter can even meet the demands of military installations. The HP range of converters provides an industry leading MTBF of over 120,000 hours.

Options

140 MHz IF Frequency

75 ohms IF Impedance

Ethernet port

Single or Dual in 1RU shelf

Group Delay Equalization

Autosensing External/Internal Reference

Input and Output Monitors

1kHz step size

Redundancy

For systems requiring redundancy Advantech Wireless can provide 1:1, 1:2 and 1:N (up to 12) solutions. The 1:N redundancy is provided by the 1:N Controller and the Switch Panel. Each Switch Panel can handle up to four (4) converter units. A 1:12 system requires one Controller panel plus three Switch Panels. A complete 1:12 complete system occupies a space of 17U.

Factory Reference: Ku-Band Synthesized Frequency Converter Single / Dual FCS300