DEV 7232 & DEV 7332

The Advanced analog RF over Fiber link provides variable Rx gain and very high linearity paired with high input signal handling. It is tailored for direct signal conversion at large antennas and RF signal transmission in uplink stations. Via RF Sensing the transmit and the receive module provide continuous RF Signal Status Monitoring on both ends of the transmission chain. LNB Powering including current monitoring is integrated in the transmit module. To obtain a quick overview about the system status LEDs at the modules enable a direct visual check and the RF Monitor Port enables straightforward and continuous signal monitoring. Integrated push buttons are available for local gain control and for LNB Powering. Various electrical and optical connectors and two transmission wavelengths are offered to cover all customer requirements. The hot swappable modules fit into all indoor and outdoor chassis of the RF over Fiber Optribution series.

The most commonly used RF over Fiber system configurations are described by DEV's RF over Fiber Solution Leaflets. Further chassis configurations are available.

FEATURES

Recommended for RF over Fiber Links with optical Losses up to 10 dB

Adjustable Gain

High Input Signal Handling

RF SensingRF Sensing measures the accumulated RF power over the entire bandwidth. This value is a quality indication to either just send an alarm to a M&C System or to perform a redundancy switching fully autonomously.  with Status LED

LNB Powering with Current Monitoring and Status LED

Push Buttons for Gain Control and LNB Powering

Available Wavelengths 1310 nm and 1550 nm

Optical Connector Type SC/APC, FC/APC or E2000 HRL

FACTORY REFERENCE: ADVANCED RF OVER FIBER LINK DEV 7232 & DEV 7332