Advantech Ku-Band Transceiver AWMTg-3000K

Ku-Band Transceiver 150W to 250W AWMTg-3000K Series L-band IF Interface GaN Technology

Overview

The Advantech Wireless Ku-Band Transceiver 150W to 250W AWMTg-3000K Series L-band IF Interface uses the latest GaN technology, thus providing the ultimate in performance and user friendly operation at a very competitive price. AWMTg-3000K is a family of GaN based hub-mount transceivers operating in the Ku-band from 150W to 250 W. These transceivers are designed for continuous operation in the harshest outdoor environment. The built-in microprocessor controller provides for external monitoring and control of the operating parameters, and for the redundancy control. The LNB is connected to the transceiver with a single coaxial cable. Apart from the LNB, the complete unit is available in a single integrated package. Higher power transceivers are also available in the AWMTg-K series for up to 1250W. The flexible and comprehensive monitor and control features on the transceiver ensure that it will fit into any network management system architecture. The user-friendly RS-232 interface will provide full set-up and fault monitoring facilities via a PC terminal mode communication or a hand-held terminal. The RS-485 interface will provide functional remote Monitor & Control, using the Graphic User Interface (GUI) or the Monitor & Control Panel.

Features

Operating Ku-Band Tx: 14.00 – 14.50 GHz 13.75 – 14.50 GHz (optional) Rx: 10.95 – 12.75 GHz ( sub-bands)

L-band Tx and Rx interface

Easy to install and operate

Compact light weight design

Weatherproof package

Phase Locked LNB

Low phase noise

Remote Monitor & Control (RS-232/RS-485)

Relay alarm indicators

LED status indicators

Automatic high reflected power protection

Harmonic Filter

High stability internal 10MHz reference

Downloadable PC GUI

Redundant ready operation

Application

The AWMTg-3000Kå¨ is designed to operate in the Ku-band with L-band IF interface. The unit is self-contained and is intended for mounting outdoors, close to the OMT of an antenna.

Options

Extended Ku-band (13.75 - 14.5 GHz)

LNA operation

Remote M&C panel (Ethernet port optional)

External 10 MHz reference with auto sensing

Accessories

Mounting kits for transceiver installation

Redundancy kits

Mounting frame for redundancy applications

Transmit Reject Filter and/or Receive Reject Filter (external)

Remote Control Panel

Hand-Held terminal

Redundancy

The AWMTg-3000K series of GaN based transceivers may be configured to operate in 1:1 redundancy mode. No extra controller is required for redundancy operation, as the built-in controller in each amplifier provides this function. Redundancy kits are required for redundant operation.

Factory Reference: C-Band Transceiver L-Band IF Interface 300W to 500W AWMT-5000LC series