All Categories
-
Nisshinbo NJT8315LF
Lower Ku-band 2W BUC
• RF Frequency: 12.75 to 13.25 GHz
• IF Frequency: 950 to 1,450 MHz
• LO Frequency: 11.8 GHz
• IF Connector: F-type (75Ω)
-
Nisshinbo NJR2841HN
Universal Ku-band 2LO PLL LNB - Mechanical Switch
Covers 10.70–12.75 GHz in two sub-bands:
• Band 1: 10.70–11.70 GHz
• Band 2: 11.70–12.75 GHz
• LO Stability: ±10 ppm (±100 kHz)
• Noise Figure: 0.8 dB
• Output Connector: N-type, 50 Ω
-
Nisshinbo NJR2841S
Universal Ku-band 2LO PLL LNB - Mechanical Switch
Covers 10.70–12.75 GHz in two sub-bands:
• Band 1: 10.70–11.70 GHz
• Band 2: 11.70–12.75 GHz
• LO Stability: ±3 ppm (±30 kHz)
• Noise Figure: 0.8 dB
• Output Connector: F-type, 75 Ω
-
Nisshinbo NJR2841SN
Universal Ku-band 2LO PLL LNB - Mechanical Switch
Covers 10.70–12.75 GHz in two sub-bands:
• Band 1: 10.70–11.70 GHz
• Band 2: 11.70–12.75 GHz
• LO Stability: ±3 ppm (±30 kHz)
• Noise Figure: 0.8 dB
• Output Connector: N-type, 50 Ω
-
Nisshinbo NJR2841E
Universal Ku-band 2LO PLL LNB - Mechanical Switch
Covers 10.70–12.75 GHz in two sub-bands:
• Band 1: 10.70–11.70 GHz
• Band 2: 11.70–12.75 GHz
• LO Stability: Depends on External Reference
• Noise Figure: 0.8 dB
• Output Connector: F-type, 75 Ω
-
Nisshinbo NJR2841EN
Universal Ku-band 2LO PLL LNB - Mechanical Switch
Covers 10.70–12.75 GHz in two sub-bands:
• Band 1: 10.70–11.70 GHz
• Band 2: 11.70–12.75 GHz
• LO Stability: Depends on External Reference
• Noise Figure: 0.8 dB
• Output Connector: N-type, 50 Ω
-
Nisshinbo NJR2842HN
Universal Ku-band 2LO PLL LNB - 22 kHz Tone On/Off
Covers 10.70–12.75 GHz in two sub-bands:
• Band 1: 10.70–11.70 GHz
• Band 2: 11.70–12.75 GHz
• LO Stability: ±10 ppm (±100 kHz)
• Noise Figure: 0.8 dB
• Output Connector: N-type, 50 Ω
-
Nisshinbo NJR2842SN
Universal Ku-band 2LO PLL LNB - 22 kHz Tone On/Off
Covers 10.70–12.75 GHz in two sub-bands:
• Band 1: 10.70–11.70 GHz
• Band 2: 11.70–12.75 GHz
• LO Stability: ±3 ppm (±30 kHz)
• Noise Figure: 0.8 dB
• Output Connector: N-type, 50 Ω
-
Nisshinbo NJR2842EN
Universal Ku-band 2LO PLL LNB - 22 kHz Tone On/Off
Covers 10.70–12.75 GHz in two sub-bands:
• Band 1: 10.70–11.70 GHz
• Band 2: 11.70–12.75 GHz
• LO Stability: Depends on External Reference
• Noise Figure: 0.8 dB
• Output Connector: N-type, 50 Ω
-
Nisshinbo NJR2843HN
Universal Ku-band 2LO PLL LNB - Input Voltage (High/Low)
Covers 10.70–12.75 GHz in two sub-bands:
• Band 1: 10.70–11.70 GHz
• Band 2: 11.70–12.75 GHz
• LO Stability: ±10 ppm (±100 kHz)
• Noise Figure: 0.8 dB
• Output Connector: N-type, 50 Ω
-
Nisshinbo NJR2843SN
Universal Ku-band 2LO PLL LNB - Input Voltage (High/Low)
Covers 10.70–12.75 GHz in two sub-bands:
• Band 1: 10.70–11.70 GHz
• Band 2: 11.70–12.75 GHz
• LO Stability: ±3 ppm (±30 kHz)
• Noise Figure: 0.8 dB
• Output Connector: N-type, 50 Ω
-
Nisshinbo NJR2843EN
Universal Ku-band 2LO PLL LNB - Input Voltage (High/Low)
Covers 10.70–12.75 GHz in two sub-bands:
• Band 1: 10.70–11.70 GHz
• Band 2: 11.70–12.75 GHz
• LO Stability: Depends on External Reference
• Noise Figure: 0.8 dB
• Output Connector: N-type, 50 Ω
-
Nisshinbo NJR2845AEF
Ku-band PLL LNB - Ext. Ref.
• Input Band: 10.95–11.7 GHz
• LO Stability: Depends on External Reference
• Noise Figure: 0.8 dB
• Output Connector: F-type, 75 Ω
-
Nisshinbo NJR2845AEN
Ku-band PLL LNB - Ext. Ref.
• Input Band: 10.95–11.7 GHz
• LO Stability: Depends on External Reference
• Noise Figure: 0.8 dB
• Output Connector: N-type, 50 Ω
-
Nisshinbo NJR2845AHF
Ku-band PLL LNB - Int. Ref.
• Input Band: 10.95–11.7 GHz
• LO Stability: ±10 ppm (±100 kHz)
• Noise Figure: 0.8 dB
• Output Connector: F-type, 75 Ω
-
Nisshinbo NJR2845AHN
Ku-band PLL LNB - Int. Ref.
• Input Band: 10.95–11.7 GHz
• LO Stability: ±10 ppm (±100 kHz)
• Noise Figure: 0.8 dB
• Output Connector: N-type, 50 Ω
